Storage and transportation guide for EDM drilling machines

In modern manufacturing, EDM drilling technology is widely used in mold manufacturing, aerospace, precision machinery, and other fields due to its high precision and good surface treatment effect. However, due to the particularity of EDM drilling equipment, special attention should be paid to its storage and transportation to ensure that the accuracy and performance of the equipment are not lost. This article will elaborate on the storage and transportation guidelines of EDM drilling machines to ensure that relevant staff can properly handle these high-value equipment.

1. Storage conditions of EDM drilling machines

Temperature and humidity control: EDM drilling equipment should be stored in a relatively constant temperature (20-25°C) and humidity (45%-55%) environment. Too high or too low temperature and humidity may cause damage to the electronic components of the equipment.

Clean environment: The storage area must be kept clean to avoid erosion by dust and corrosive gases. It is recommended to cover the equipment with a dust cover to avoid direct contact with pollutants.

Shock protection: The equipment should be placed on a stable shelf to avoid any factors that may cause vibration. Vibration may affect the accuracy of the equipment and even damage sensitive components.

2. Transportation Preparation

Packaging materials: Use packaging materials with good shockproof performance, such as foam plastics, bubble film, etc. to ensure that the equipment is protected from impact during transportation.

Packing method: First, use soft packaging materials (such as foam) to completely wrap the equipment, and then put it in a hard outer box. Fill the outer box with cushioning materials to ensure that the equipment will not be displaced in any direction.

Marking and Documentation: Clearly mark “fragile” and “this end up” on the outside of the package, and attach shipping instructions and equipment maintenance manuals.

3. Transportation method

Land transportation: Choose an experienced logistics company and use an air cushion suspension vehicle for transportation to reduce the impact of bumps on the equipment.

Sea transportation considerations: If sea transportation is required, ensure that the inside of the container is dry and has fixings to prevent the equipment from shaking in the waves.

Air transportation tips: Air transportation is a fast but costly method, suitable for urgent orders. Make sure to comply with the airline’s transportation regulations for precious and precision instruments.

4. Inspection and installation after arrival

Arrival inspection: Inspect the equipment immediately after arrival to confirm that the packaging is intact and the appearance of the equipment is not damaged.

Environmental adaptation: After the equipment arrives in the new environment, it should be placed for a period of time to adapt to the local climate, especially the changes in temperature and humidity.

Installation test: Installation is carried out by professional technicians, and necessary tests are carried out to ensure that the accuracy and function of the equipment are not affected.

By following the above guidelines, the safety of the EDM drilling machine during storage and transportation can be effectively guaranteed, and the equipment can be put into use immediately after arriving at the new location to maintain the continuity and efficiency of production.

As a high-precision processing tool, the EDM drilling machine needs to pay special attention to the implementation of environmental control and protection measures during storage and transportation. Through strict storage conditions, careful transportation preparation, suitable transportation methods, and careful inspection and adaptive adjustment after arrival, the risk of equipment damage can be greatly reduced and the long-term stable operation of the equipment can be guaranteed. This is not only a guarantee of equipment quality, but also a protection of the economic benefits of the enterprise.

As an EDM drilling machine OEM, we are committed to providing high-quality drilling machine products and services to meet the various needs of customers. We have advanced production equipment and technical teams and can customize EDM drilling machines of various specifications and models according to customer requirements. At the same time, we also provide a full range of pre-sales consultation and after-sales services to ensure that customers receive timely support and assistance during the purchase and use process.